Specialized 10 AXLE 75 T AIR RIDE is designed to perform in a variety of operating conditions, both on and off road carrying diverse workloads and handling the demands of challenging loading conditions. Combine innovative structural design with horizontal four pin detachable deck design to provide industry leading stability under high center of gravity maximum allowable payloads and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight - Detachable Gooseneck - Low Deck Height - Interchangeable Goosenecks
Safety
Low Center of Gravity - Self-Locking Latch - Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training - Factory Written Warranty
Specifications: Overall Trailer
Capacity: 150,000 lbs concentrated in 14’.(without any deck inserts).GAWR & Tire rating determine legal loads
Nominal dimensions: 96’-1”long. 28’-0” deck length X 9’-0’ wide
Small Mechanical Gooseneck
Upper Coupler: 50” king pin height, 2”drop in pin, and 15” setting.
Swing Clearance: 78”,88” & 98”
Gooseneck: With Kalyn Siebert “Posi-Latch”. (12’-0” Long)
Two Axle Jeep
Capacity: 25 Ton (50,000 lbs)
Nominal dimensions: 19’-0” long X 9’-0” wide
Neck Ramps: Sloped ramps for mechanical neck
Power Tower (Hatbox): 13 HP Honda power pack with 16” of cylinder travel in tower.
5th wheel: Sliding 5th wheel plate .12” of travel
Suspension: Ridewell Model 240 Air Ride suspension, 60” axle spacing, lift chains. Air Weigh air scales.
Air Controls: Automatic/Manual ride height control system. Manual raise and lower valve with liquid filled air pressure gauge.
Axles: Two OEM axles, 5” round, ¾” wall, tapered spindles, 25,000 lb capacity, 83” track
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7”. No parking brakes.
ABS: None
Slack adjusters: Automatic slack adjusters, 28 spline.
Wheels Steel disc 8.25 X 22.5
Tires: OEM, 295/75R22.5, 16PR radial tires.
Mud flaps: Black Anti-Spray with Kalyn Siebert Logo
D-Rings: Four D-Rings on jeep for picking up to stack.
Large Mechanical Gooseneck
Upper Coupler: 59” king pin height, 2” pin, and 15” setting.
Swing Clearance: 200” low profile scraper neck(20’-10” long)
Gooseneck: With Kalyn Siebert “Posi-Latch”.
Main Deck and Rear Section
Nominal dimensions: 49’-3” length X 9’-0’ wide
Deck: 28’ level deck with detachable rear section for installation of deck inserts. Horizontal pin joint design for maximum shimming to raise and lower rear deck height.
Deck Height: 24” deck height with 6” ground clearance at rated capacity.
Cross members Formed channel cross members on 24” centers. 80,000 psi yield strength minimum.
Decking 2 ¼” Apitong floor outer only. Center is open to store outrigger boards.
Outriggers: Full set of heavy cast removable outriggers with storage in neck.
Tool Tray: Optional
Tie Downs: Square holes in deck, chain slots in bolsters, 16 D-rings on lower deck.
Flag Holders: Two pair, front and rear
Suspension: Ridewell Model 240 Air Ride suspension, 60” axle spacing, lift chains. Third axle ,air ride with air lift
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
Axles: Two OEM axles, 5” round, ¾” wall, tapered spindles, 25,000 lb capacity, 83” track(third axle air with lift)
Brakes: 16½” X 7”. No parking brakes
Slack adjusters Automatic slack adjusters, 28 spline.
Wheels: Steel disc 8.25 X 22.5
Two Axle Booster
Capacity: 48,000# tire load at ground.
Width: 9’-0” wide
Booster spread: 14’ 1” booster spread
Steering: Towable, rear articulating follow steering
Bump steering: OPTIONAL-Hydraulic bump steering with 20 HP Honda power package mounted on bolster (optional)
Booster pin: 4” steel shaft and 6.25” steel collars with greaseable brass bushing inserts
Lock pin: Dual air lock pins to lock booster straight while backing
Wide load sign: Wide load sign on rear booster
Tie downs: Four D- Rings for picking up to stack
Flag holders: One pair, at rear
Finishing(Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: LED Sealed beam with mid turn signal, 12 volt. 7-way plug Amber strobe light in bumper
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 49,200 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty. One-year on remainder.
Options:
Additional deck length
Deck insert,5’,10’
Additional tie downs D-rings
Tool tray-expanded metal ,6’-0”
Bump steer with power package
Aluminum wheels (polished or mill finished
Swing clearance, additional
Drop in kingpin-additional
Wide load sign
Liquid filled gauge
Synthetic grease
Gray Wheels (at time of order)
Paint-color-contact RSM
Parking brakes
Spare tire and wheel
Spare tire rack
Hubodometer
Document holder
Steel wheel covers
Additional side marker lights
Plug @rear for beacon 4-way
Plug male 4 way
Internal strobe, Two lights ,toggle switch
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
