Siebert Wind Blade trailer features a wireless remote steering system, which allows for better maneuverability-even when caring an extended load. The steering is powered by A DC power pack, which charges from the tractor. Innovative structural and self steering design provide industry leading stability under high center of gravity maximum allowable payloads and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Low Transport height – Self Steering
Safety
Low Center of Gravity – Warning Decals – Wireless Controls (steer)
Value
Resale Value - Owner/Operator;s Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications:
Capacity: 70,000# closed; 50,000# open loaded 2 points on neck and over suspension; 35,000# 2 windmill blade load utilizing taco supports.
Overall Description: 53’ single drop triple extendable that opens to 128’5” or 148’5” with a 20’ rear pull out. Neck is removable for future extension. Two adjustable blade cradles and one movable load bunk included.
Overall Nominal Dimensions: 8’ 6” nominal wide X 53’ nominal closed, 128’ 5” open 148’5” with 20’ pull out at rear. 9’8” upper deck
Swing clearance : 84”
Upper coupler: 2” pin, 15” setting, 50” fifth wheel height
Landing gear: 2-speed landing gear with roadside crank handle.
Deck height, loaded: 49” nominal
Beam Locks: Manual lock pins. Smallest beam section has stops spaced every 12” in order to fine tune trailer length.
Taco Supports: 2 “Taco” blade supports included – one support for largest rear section and one support for smallest front section. Supports are adjustable in width and height with double hitch pins for safety. Taco supports can slide the length of the beam and are secured by heavy-duty ratchet binder.
Sliding bunk: Sliding bunk included. Bunk is adjustable to fit all 3 box beam sections. Stake pockets and rub rail with single pipe spool included. Bunk secured by heavy-duty ratchet binders.
Suspension: Ridewell Model 240 Air Ride, 55” spread.
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
Axles: Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity.
Axle Chains: Axle chains on front axle to chain up while running empty.
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum.
Seals: Oil
Brakes: 16½” X 7” air. Spring brakes on both axles with release valve.
ABS: 4S/2M
Slack adjusters: Automatic slack adjusters.
Wheels: Steel disc wheels, 8.25 X 22.5
Tires: 275/70R22.5 OEM radial tires
Steering: Hydraulic axle steering, with DC power unit w/ emergency hand pump, wireless remote controlled included. 2 deep cycle batteries included for DC power unit with trickle charge circuit. Hydraulic locks on each axle keep axles straight while traveling. Hydraulic controls mounted in stainless steel toolbox mounted between axles. Toolbox is mounted on ball bearing slides to allow easy access to components.
Fenders : Poly fenders
Under ride: Included
Bumper Pullout: 20’ non load bearing bumper pullout included. Spring loaded latches on each side with stops located every 12”.
Lights & electrical: LED with mid turn signal and amber flasher at rear 12 volt. 7-way plug
Mudflaps: Black anti-spray with Kalyn Siebert logo.
Finishing(Paint & trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed.
Conspicuity Tape: Discontinuous on sides.
Manual: One operator manual per order will be provided. Parts manual available as option.
Warranty: 5 year prorated frame warranty. 3 year prorated paint warranty. 1 year warranty on remainder of trailer.
Weight: 25,000 lbs +3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Options:
Aluminum wheels polished or mill finished
Paint-color-contact RSM
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
