Transporting construction materials requires durable, reliable equipment—and the HEIL Cementer is tough enough for the job site. Designed specifically for transporting granule building materials, the Cementer delivers payload after payload with unmatched resilience.
Quality
Design – Construction – Certification – Components – Craftsmanship
Performance
Service Life – Tare Weight – Unloading Rate – Temperature Rating – Pressure Rating
Safety
Manhole – Ladder – Walkway – Roll Stability – Accessibility
Value
Resale Value – Payload – Low Operating Costs – Operational Support
Customer Support
Warranty – Dealer Support – Technical Support – Product Literature - Training
Specifications:
Material: Mill finished aluminum.
Testing: Hydro tested at 22.5 psi.
Design Pressure - 15 psi
Ladder: Located at rear; handrails extending up and over rear end cone
Walkway: Non-skid tape. Toe rails to extend past first manhole.
Fenders: Aluminum single contour front and double contour rear
Fenders: Heil anti-sail flaps.
Lights: 12 Volt Truck Lite flange mount LED lamp system complying to FMVSS with conspicuity markings each side and rear.
Upper Coupler: High-tensile steel, bolted and adjustable with 2” forged kingpin.
Landing Legs: JOST 2-speed with large sand shoes and streetside crank.
Gauges: Two liquid filled, pressure range 0-30 psi located on streetside framerail between number one and two hoppers.
Product Valves: 5” figure 500 butterfly valve, aluminum body, with cast iron disc and steel stem at each hopper operated roadside.
Discharge Line: Cast aluminum 5” tee at each hopper. 4 in. Schedule 40 aluminum pipe connected with rubber sleeves and clamp connectors between hoppers; fitted with 4” weld-on aluminum adapter and cap. Line extends under axleto extreme rear.
Pressure Control: 3” figure 500 butterfly aluminum valve, located roadside to regulate airflow to product discharge line.
Air Line: 3” Inlet at street side equipped with welded aluminum adapter. 3”swing check valve at air inlet and upstream of front hopper.
Blow Down Line: 3” aluminum line with 3” figure 500 butterfly valve aluminum butterfly valve and mechanical relief valve; located roadside front.
Aeration: One 3” aluminum butterfly valve at roadside controls airflow to aeration manifold on curbside. Line ends with aluminum threaded cap. Each hopper fitted with three Sure-Flo aerators with stainless steel wear plates.
Hose Tube: One 8” x 21’ aluminum tube, mounted curbside flush with rear of trailer.
Suspension: Hendrickson “R2 “ Intraax AAT23-RC, parallel spindles and extended service brakes. 71.5” track, 5” round, 5/8” wall, 23,000 lb. axle beam rating, 49” spacing, with single leveling valve.
Axles: Integrated with air ride.
Brakes: Aluminum air reservoir, 16.5” x 7” (quick change) S-cam type brake shoes, Haldex Life Seal brake chambers, Haldex automatic slack adjusters, Haldex 4S-2M ABS with roll stability control.
Hubs: 10 Stud, “Hub Pilot” (single nut mount), aluminum hub for outboard drum (parallel spindle).
Drums: Centrifuse-outboard mount brake drums (16.5” x 7”).
Oil Seals: Preset bearing with OEM seals and visible-fluid type hubcaps.
Paint: Silver metallic Imron Series 5000 on steel parts.
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
