KSHRG is designed to perform in a variety of operating conditions, both on and off road carrying diverse workloads and handling the demands of challenging loading conditions. The five position Gooseneck height controls, strong trailer construction and efficient design workd together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Adjustable Gooseneck – Low Deck Weight
Safety
Low Center of Gravity – Self Locking Latch – Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications: Capacity: 130,000 lbs concentrated in 14’’ with 4 axles in line.GAWR & Tire rating determine legal loads
Deck Length(Load space): 59’-2” length ,main deck 26’ X 9’-0” wide
Gooseneck: Adjustable 5 position ride height with Kalyn Siebert “Posi-Latch”. At highest position, approximate ground clearance at front of main deck is 32”
Swing Clearance: 96” and 108” with flip neck to 257”
Upper Coupler: 52” king pin height, 2” pin, and 15” setting.
Hydraulics: PTO powered as standard (15 GPM,28 PSI)
Main Deck height: 22” at rated capacity.6” ground clearance
Beams: Four beam design, 130,000-psi yield flanges and 100,000 psi yield web. All 4 beams are the same height.
Crossmembers: 8” I –Beam 24” centers
Floor: 1 ¾” Apitong with bridge clips and carriage bolts on every other cross member. Center open.
Wheel covers: Load-bearing steel wheel covers
Outriggers: Removable swinging side brackets ,14 pair
D-rings: 4 pair (bent) on siderail. Double key hole slots - one on each bolster and rear of deck.
Tool Tray: Expanded metal tool tray at front of lower deck, approximately 6’ long.
Boom Trough: First two cross members at rear lowered. No metal rear boom trough tray
Ramps: Front loading ramps, 10 ¾” drop from top of tapered ramp to ground.
Lugs: Included for addition of optional flip axle or booster
Suspension: Ridewell Model 240 Heavy Duty 30K Air Ride, 60” spread. Rear axle has cut off valves and chains for lifts on all axles(lift front axle using air bag type lift)
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
Axles: Four axles, OEM, 5” round with ¾” wall, tapered spindles, 25,000 lb capacity .U-Bolts on all axles
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air. Parking brakes on two axles
ABS: None
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: Michelin XTY2, 275/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing(Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED with third tail light as strobe with toggle switch .
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 32,320 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty. One-year on remainder.
Flip axle: Fifth axle flip (set up for future spreader bar)
Weight: 3250 lbs
Options:
Self contained power package in base of gooseneck (13 HP Honda)
Additional deck length
Swing clearance
Two place kingpins(drop in)
Drop siderails
Additional tie downs D-rings
Aluminum wheels-polished or mill finish
ABS 4S-2M
Paint –color –contact RSM
Spreader bar for 14’ spread
Removable wheel covers
Front loading ramps
Air lock pin at deck
Full apitong (1 ¾” deck)
Removable boards for brackets
Boom trough removable cover
Two cleats on Bolster
Parking brakes
Spare tire and wheel
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
