MRG is designed to perform in a variety of operating conditions, both on and off road carrying diverse workloads and handling the demands of challenging loading conditions. Designed to offer a lower carrying height which enables end users to transport taller loads within the allowable carrying capacity. Ease of operation, designed to operate without hydraulics or winch in removing gooseneck. Strong trailer construction and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Detachable Gooseneck – Low Deck Weight
Safety
Low Center of Gravity – Self locking Latch – Warning Decals - Operation
Value
Resale Value - Owner/Operator's Cost - Factory Tested - Finish
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications:
Capacity: 106,000 lbs distributed, 80,000 lbs concentrated in 16’’.GAWR & Tire rating determine legal loads
Overall nominal dimensions: 54’-3” length, Gooseneck 12’-10”, main deck 27’3”,rear deck 14’-2”
Gooseneck: Arched, narrow, mechanical removable type. 2 position hangers allow lower deck height when running empty.
Swing Clearance: 96”&108”
Upper Coupler: 50” king pin height, 2” pin, and 15” setting.
Front gooseneck rollers: Incorporated into king pin plate to keep rollers (with bronze bushings) from extending beyond front of gooseneck.
Latch: Self-locking, positive, visible latch to expedite attaching & detaching of gooseneck
Main deck height, loaded: 20” at rated capacity. 6” ground clearance. Two position hangers for height control
Beams: Four beam design - 130,000 psi yield flanges and 80,000 psi yield web. All 4 beams are 14” in height.
Crossmembers: 10”formed channel on 24” centers
Floor: 1 3/4” Apitong with bridge clips and carriage bolts on every cross member. Center not floored..
Outriggers: 14 per side, swinging and removable
D-rings: 5 pair (bent) per side,1 on rear of gooseneck,3 on deck,1 on rear section boom trough.
Boom Trough: First two cross members at rear lowered. No metal rear boom trough tray
Tool Tray: Expanded metal tool tray at front of lower deck, approximately 6’ long.
Ramps: No front ramps or bridge to rear deck ramps as standard, 10 3/4” drop from top of tapered ramp to ground.
Suspension: Ridewell Model 240 Air Ride, 60” spread,. Lift chains and cut off valves on all airbags
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure; Manual dump valve standard.
Axles: Three axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air. No parking brakes as standard.
ABS: None
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: OEM, 255/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing (Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 16,300 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty; One-year on remainder.
Options:
Additional deck length
Swing clearance
Flip gooseneck (extension)
9’-0” width
Additional tie downs D-rings
Swinging side brackets
Expanded metal under crossmembers
Aluminum wheels-polished or mill finished
Fourth axle flip
Lugs, air & electrical at rear
Front loading ramps
Beavertail (dovetail)36”
Full apitong (13/4” deck)
Removable boards for brackets
Parking brakes
Spare tire and wheel
ABS 4S-2M
Paint-color-contact RSM
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
