KDPEX-3-100/80 3+2 Tandem axle booster (Low Profile) Step Deck Platform Extendable
Platform trailers are designed to perform in a variety of operating conditions on the highway carrying diverse workloads and handling the demands of challenging loading conditions. This line has the ability to transport a variety of general commodity loads and specialty construction equipment self supporting loads supported and blocked in two point position when open. Strong trailer construction and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Low Deck Weight
Safety
Low Center of Gravity – Warning Decals
Value
Resale Value - Own/Operators Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Warranty
Specifications:
Capacity: 100,000 lbs distributed in53’,80,000 lbs open distributed in 77’(load in open position must be 2 point blocked).GAWR & Tire rating determine legal loads
Overall dimensions: 53’ OAL,10’ -3” Upper deck,42’-9”; lower deck - 77’ open,66’ open rear
Gooseneck: Narrow arched
Swing Clearance: 84”with 36” flip extension giving 120” swing
Upper Coupler: 49” king pin height, 2” pin, and 18” setting.
Landing gear: 2-Speed landing gear with roadside crank handle
Deck heights, loaded: 29 ½” at rated capacity at rear
Beams: 130,000-psi yield flanges and 80,000 psi yield web. 20” main beam and 6” side channels.
Crossmembers: 12” centers,4” Jr I beams
Rub rail, stake pockets: 2 x 5/16” rub rail ,24” centers for stake pockets, and single pipe spools as standard
Flex track: Track between main beams to enclose and provide protected travel of air and electrical lines during extension of trailer
Stops: Air operated for extendable length with stops approximately two @18”,2@24”,balance @60”.Track carrier for air and electrical lines allow extension /retraction without disconnecting/reconnecting lines
Winch Track: Outside channel both sides are notched for winches.
Lugs: Lugs ,air and electric at rear for flip axles or 14’ spreader bar
Floor: 1 1/8” Apitong with screws on every cross member.
Suspension: Ridewell Model 240 Air Ride, 60” axle spread
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
Axles: Three axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 8 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 12 ¼” X 7 ½” Air. Parking brakes on all axles
ABS: 4S/2M front and rear axles
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 6.7 5X 17.5
Tires: OEM, 235/70R17.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing (Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 27,500 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty. One-year on remainder.
Tandem axle Booster 14’-1” spread Low Profile
Capacity: 48,000 lbs at axles, GAWR & tire rating determine legal loads
Overall dimensions: 8’ 6” nominal wide
Deck height, loaded: 29 ½” nominal at rear
Lugs: Tandem axle can be detached and used as a single axle. Each individual axle can be pinned to rear of trailer.
Landing gear: Dual drop swinging legs
Spread: 14’ 1” from rear of last trailer axle to front axle on booster
Suspension: Air ride, Ridewell,60” axle spacing standard, nylon straps on all shocks
Axles: Two axles, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity, 77.5” track.
Brakes: 12¼” X 7½” Air.
ABS: None
Slack adjusters: Automatic slack adjusters.
Hubs: 8 stud, hub piloted, long studs, steel hub
Wheels: Steel disc wheels, 6.75 X 17.5
Tires: OEM, 235/70R17.5, 16PR (Low Profile) radial tires.
Wheel covers None
Steering: Towable rear steering, articulating with twin air locking pins to backing.
Sign: “Oversize Load” sign with flag holders, brackets on rear of trailer and each tag for sign.
Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure; manual dump valve standard.
Smart Bag System: Valves included on each tag to dump air bags in the event of a sudden pressure spike in order to protect rear of trailer in a “bridging” situation.
Lights & electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.
Mudflaps: Black Anti-Spray with Kalyn Siebert Logo.
Finishing (Paint & trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed.
Manual: One operator manual per order will be provided. Parts manual available as option.
Weight: 9550 lbs +3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty; one-year on remainder.
Options:
Deck length
Full width gooseneck
Bulkhead 48” aluminum or steel
Swing clearance
Two place kingpins (drop in)
Tie downs D-rings
Aluminum wheels-polished or mill finished
Hubodometer
Ratchet winches-sliding type
Ratchet winches welded underneath
Ratchet winches welded on siderail between pockets
Ratchet winches recessed in side rail
Flag holders
Parking brakes
Spare tire and wheel
LED Lights
Third tail light package
Pressure equalization system
Double pipe spools
Chain tie downs-pop up type
Steel slider track
Aluminum slider track
Nylon straps
Tool box steel or aluminum
Paint-color-contact RSM
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
